w208 stops the compressor

Page may contain affiliate links. Please see terms for details.

cafaki

New Member
Joined
Jun 5, 2013
Messages
3
Car
W208
hello I have 200k 192 horsepower. car runs fine when the plural is cold engine as the car warms up the compressor turns off and becomes very sluggish. Kade could be the problem ...?? I would be grateful if you help me because in my country ute so familiar
 
Welcome to the forum :thumb: key items to check are the Kompressor air piping under the air box and the bypass flap that feeds into the airbox these are the 2 well known problems causing the Kompressor to drop out
 
I went today to the diagnostic error - P0341 Camshaft Hall - effect sensor (B48). This should be a sensor on the shaft? is it possible for him to exclude the compressor? but why do it when the car warms up ..?
 
Camshaft sensor is right at the front of the engine facing you under the little cover, sometimes these get filled with oil and malfunction so this could be the case. It happened on mine but when the cam sensor failed the Kompressor stopped working all together but definitely worth checking
 
6191829V.jpg
 

Users who are viewing this thread

Back
Top Bottom