I'm a little confused about replacing the front disks+pads on my '05 W209 CLK500.
I bought Zimmerman disks & Mintex pads from my local ECP.
The two disks look to be the right size etc., are identical, and the boxes carry a Zimmerman part number plus ""A 209 421 00 12".
A check on the disks fitted at the moment (presumably original since it has only done 49K miles) show them to be left & right handed. The variation is in the way the ventilation slots curve - both disks on the car pull air in from the edge of the disk, exiting by the hub.
So how come the car was made with different disks left & right, but EPC Net shows only a single part number - "A 209 421 00 12" ?
I'm not going to worry about this - I can't see my driving style ever getting the disks hot enough for it to matter, but I would like to know what's going on.
Thanks,
Ian.
I bought Zimmerman disks & Mintex pads from my local ECP.
The two disks look to be the right size etc., are identical, and the boxes carry a Zimmerman part number plus ""A 209 421 00 12".
A check on the disks fitted at the moment (presumably original since it has only done 49K miles) show them to be left & right handed. The variation is in the way the ventilation slots curve - both disks on the car pull air in from the edge of the disk, exiting by the hub.
So how come the car was made with different disks left & right, but EPC Net shows only a single part number - "A 209 421 00 12" ?
I'm not going to worry about this - I can't see my driving style ever getting the disks hot enough for it to matter, but I would like to know what's going on.
Thanks,
Ian.