IanT
Active Member
I've spent most of today fitting my new M-B APS into my 2001 model W210, but have two wires remaining that I really would like to know where to connect.
I have a WIS printout, but this appears to be for a car without the newer Brake Assist System (BAS) and Electronic Stability Programme (ESP).
What I need to find are the two connections that give speed pulses from the front left and front right wheels. My existing (CANBUS and fibre-optic) Audio 10 had no speed pulse connection as far as I can see, although there is a grey wire in pin 1 of the ISO connector. The connections I need are the ones that alternate between 0V and 12V as the wheels rotate.
Has anyone any info to help me identify the correct wires to connect to in the loom?
All help appreciated!
Cheers, Ian.
I have a WIS printout, but this appears to be for a car without the newer Brake Assist System (BAS) and Electronic Stability Programme (ESP).
What I need to find are the two connections that give speed pulses from the front left and front right wheels. My existing (CANBUS and fibre-optic) Audio 10 had no speed pulse connection as far as I can see, although there is a grey wire in pin 1 of the ISO connector. The connections I need are the ones that alternate between 0V and 12V as the wheels rotate.
Has anyone any info to help me identify the correct wires to connect to in the loom?
All help appreciated!
Cheers, Ian.