• The Forums are now open to new registrations, adverts are also being de-tuned.

w211 bumper mouldings

parkscon

Member
Joined
Dec 21, 2013
Messages
49
Location
margate kent
Car
mercedes 320 cdi avengard
Hi does anyone know how to remove the front bumper mouldings on my 2004 w211 e320, I need to access my parking sensors if possible some pics please.
Kevin :dk:
 
Can you not just access them from underneath?
 
You need to use panel removal tools, the mouldings just clip out and in. Need to be careful and use the right tool or you will mark them.
 
From memory on 2004 car front bumper has to come off.

Screws at headlamps and intercooler. Release front lower edges of wheel skirts then front undertray off. Small screws in outer end of clamps that secures bumper to wing lower edge then clamp pushes off frontways.

Release various electrical connectors.



.
 
Last edited:
Please post a picture but on my 2005 W211 the mouldings come out.

If you stand facing the wing corner of the moulding, this is where you want to use the panel tool as MrHanky mentioned to click out the moulding before the corner. The remainder then slides out - be gentle but firm.

Let us know how you get on. :thumb:
 

Users who are viewing this thread

Back
Top Bottom