W211 e class suspension question

Page may contain affiliate links. Please see terms for details.

Profdriver

New Member
Joined
Feb 26, 2022
Messages
1
Location
Blackburn
Car
W211 e class 2008
Hello and thanks in advance.
My REAR driver side suspension does not go up fully anymore after FRONT left wheel bearing was replaced. It was in the garage with front end lifted for 2 days until we found a hub and bearing.

When I went to collect the car front left still looked raised even though it wasnt.

When the car started it was then almost level at the back.

Now when the car is switched off the rear driver side is down significantly and front left is raised.

Can someone offer advice please. Thanks
 
Does the car have Airmatic ?. Could be a leak in the rear drivers side airbag, perhaps try resetting the Airmatic system (plenty of info on line) and see if it behaves again.
 

Users who are viewing this thread

Back
Top Bottom