W211 e220 cdi 2005

[BAZ-500SL]

Ello guys need a bit of help my e220 is going in to limp mode it's not going above 3000 rpm, but if the MAF is not connected she runs fine, so I replaced it with used working MAF sensors but still has the same issue after it runs for a mile or so, is there anything that may be the problem, I'm not sure but do these car have a DPF and if so will this cause the problems I am having all help is greatly appreciated in advance

 

[4life211]

Ello guys need a bit of help my e220 is going in to limp mode it's not going above 3000 rpm, but if the MAF is not connected she runs fine, so I replaced it with used working MAF sensors but still has the same issue after it runs for a mile or so, is there anything that may be the problem, I'm not sure but do these car have a DPF and if so will this cause the problems I am having all help is greatly appreciated in advance

Is there any CEL on or any sign ?
It might be turbo actuator because it easy fails .

 

[BAZ-500SL]

Thanks for the reply there are a few malfunctions one is a battery picture saying visit workshop also a few others I will recheck to see so if it shows CEL is something wrong with the turbo achulator