W211 E320 CDI - Xenon - Headlight Part Number?

Page may contain affiliate links. Please see terms for details.

orangeboy

Active Member
Joined
Nov 26, 2009
Messages
164
Car
E320 CDI Avantgarde
Hi Fellas,

I´ve exported my UK W211 to Spain, and I´m looking to buy a pair of Xenon headlights from Germany to make it legal here (lever to level out beam not working correctly on left, and so better to buy a pair)

How can I find the part number?

The VIN is : Wdb2110262a627813

Would the following be okay?




Thanks in advance!!
 
Don't count on this but you have option code 618 xenons currently and I think option code 614 would be the corresponding lights for right hand traffic. EPC gives parts as left: A2118201361 and right: A2118201461.
 
Hi Fellas,

I´ve exported my UK W211 to Spain, and I´m looking to buy a pair of Xenon headlights from Germany to make it legal here (lever to level out beam not working correctly on left, and so better to buy a pair)

How can I find the part number?

The VIN is : Wdb2110262a627813

Would the following be okay?




Thanks in advance!!
The bottom two I´ve listed interest me the most, but when I put car spec into "my garage" on ebay, it says they are not compatible.....??????
 
The seller is saying these are "Kurven lichts" which i presume is a system to follow the curve of the road - is this an optional extra, or is the 2004 W211 320 CDI standard with these?
 

Attachments

  • 20220120_163025.jpg
    20220120_163025.jpg
    1.6 MB · Views: 1
  • 20220120_163038.jpg
    20220120_163038.jpg
    1.6 MB · Views: 1
The bottom two I´ve listed interest me the most, but when I put car spec into "my garage" on ebay, it says they are not compatible.....??????

The bottom two of the list have incorrect MB part number, the part number refers to the range controller. They likely are for the 615 option instead of 614 (for right hand traffic, left hand steering).

I did not check but the curve illumination model might ask for a different CAN implementation, CAN bus going to the light unit while the early ones had it to SAM only (level signal via a single control wire).
 

Users who are viewing this thread

Back
Top Bottom