w211 stock to amg bodykit

Page may contain affiliate links. Please see terms for details.

Ruonis13

Member
Joined
Dec 24, 2014
Messages
51
Location
East London
Car
Mercedes W211 2.6 V6
:dk: Hi ALL!
wink.gif


I have a e240 saloon (2002) PLATE MB...and I really want to put a AMG kit on it! 1st question will it fit? and I mean just like that...screw off / screw on . Has any1 done that b4, and is it easy and will it work.

Many thanks guys :thumb:


__________________
Ron w211 2.6 V6,Elegance:thumb:
slayer.gif
 
Front & Rear bumpers should fit easy enough, the sideskirts will be grief but not impossible.

Your biggest issue will be sourching the kit, all the grills, foglights and then spraying it to the correct colour.

Also, the rear bumper has cutouts for the quad exhausts so it will look odd with the duel pipes of the E240 which point downwards.
 
Thanks for a quick reply.

Well I think bumpers should come with all the grills / fogs...?
There is plenty of options on ebay, about exhaust, yes i know :mad: I might get that soon as well,but thats like 500£+ :eek:

So basically everything IS possible,but it might be a little hard on few bits :rock:
 
If your buying them new from MB, budget over £3k for the lot...!

2nd hand will be tricky to get grills etc
 
If your buying them new from MB, budget over £3k for the lot...!

2nd hand will be tricky to get grills etc

Agree everything is separate additional cost to bumper. This Includes the impact inserts down to the little plastic clips required to fit the lower mesh grilles.
 
as Karl says it will fit, all clips and bumper inserts will be needed.

if you buy new - every component is separate

best bet (and cheapest) would be to find a second hand set

everything is very expensive new -probably cost more than the car is worth!

eg a full E55 front bumper setup from a dealer is £1300 ish
 

Users who are viewing this thread

Back
Top Bottom