W212 E Class Windscreen Washer Nozzle Adjustment

[kjl]

I was wondering whether it was possible to redirect the water jets as mine are too low. I have looked in the paper handbook and the electronic version and can find no reference to it. In the old days you just stuck a pin into the nozzle and redirected it, but this doesn't look possible on the E.

I have done a search on the site but cannot find any information, but my searching technique may be at fault as I have never manged to find anything I wanted to know on the site by using the search. But that may need another thread to tell me where I am going wrong.

 

[brianpaul]

w212 e class washer jet adjustment

To adjust the windscreen washer jets on a w212 e class you need a special tool as follows.
WS82.00-P-0147A 001 589 02 16 00 Adjustment tool FG 82/Set A 22.9.10
MODEL 204, 207, 212, 218
Use:
For adjusting the fan washer nozzles for the window cleaning system

 

[brianpaul]

I have contacted the main dealer and the price for the correct tool is £22.13 + vat and it has to be ordered from Mercedes in Germany. I think i will try to make one up as this price is well over the top just to adjust washer jets.

 

[kjl]

I found out there was a special tool to adjust the nozzles but like you thought it was too expensive for what it was and the amount of use it would get. I made up my own tool from two pieces of metal flat bar bent into a L shape but I haven't got around to joining them together. However, by just holding them together I managed to get the nozzles to move. But as the car was going into the dealer for some work under guarantee I got them to fine tune the adjustment with the right equipment.

 

[jonhancock]

This windscreen washer jet tool for W204, W207, W212, W218 is available through Amazon, although not branded Mercedes, does the job just fine, and a quarter the price: https://www.amazon.co.uk/dp/B07YTQFDPQ
Thank you to @brianpaul for the original part number

 

[Petrol Pete]

Wow ! great thread revival , 10 years. The tool you show does not work on many MB's with 'slot type' washer nozzles , it's too big to fit in the slots , if it did fit it would make no difference as the nozzles for which no tool is available are not adjustable.