w212 Prop Shaft Heat Shield

Page may contain affiliate links. Please see terms for details.

sparksw212

New Member
Joined
May 19, 2023
Messages
2
Location
Warwickshire UK
Car
2013 e220 w212 facelift
Hi folks,
My 2013 e220 w212 developed a noise, and having a quick squint underneath I can see its a heatshield where the holes for the fasteners have rusted through and it had dropped onto the prop.

I've wedged the front edges under the soundproofing ( no idea what the big cover under the car is for so guessing) which is ok as a temporary measure.

Does anyone have a parts catalogue I have have a look at to identify the part and get a part number please ?
 
Hi folks,
My 2013 e220 w212 developed a noise, and having a quick squint underneath I can see its a heatshield where the holes for the fasteners have rusted through and it had dropped onto the prop.

I've wedged the front edges under the soundproofing ( no idea what the big cover under the car is for so guessing) which is ok as a temporary measure.

Does anyone have a parts catalogue I have have a look at to identify the part and get a part number please ?
I’ve used penny washers from B&Q to repair this issue on a few cars. Take off the nut, place washer over mounting hole and replace nut and repeat for all the corroded holes.
 

Users who are viewing this thread

Back
Top Bottom