MRkCLS
Active Member
- Joined
- May 31, 2015
- Messages
- 78
- Location
- Witham St Hughs
- Car
- Mercedes-Benz CLS w219 350 CGI, Mazda Mx-3 2.5 V6 KLZE
Hi,
Has anyone fitted EBC brake discs on their CLSes?
My front discs and pads need to be replaced, so I was thinking about EBC set of standard discs and green stuff pads. From what I noticed, there are no grooved ebc discs for 350 CGI models (330mm disc diameter) and green pads are the max you can get.
EBC Front Brake Kit Discs & Pads for Mercedes CLS (C219) CLS350 2005-2010 | eBay
Is it worth trying this set?
Additionally, I was thinking about HEL stainless steel brake lines. They are still ok at the front (just rear ones are nearly done), however I could buy a set of 4 and replace the front ones along with discs and pads.
Anybody tried them?
Has anyone fitted EBC brake discs on their CLSes?
My front discs and pads need to be replaced, so I was thinking about EBC set of standard discs and green stuff pads. From what I noticed, there are no grooved ebc discs for 350 CGI models (330mm disc diameter) and green pads are the max you can get.
EBC Front Brake Kit Discs & Pads for Mercedes CLS (C219) CLS350 2005-2010 | eBay
Is it worth trying this set?
Additionally, I was thinking about HEL stainless steel brake lines. They are still ok at the front (just rear ones are nearly done), however I could buy a set of 4 and replace the front ones along with discs and pads.
Anybody tried them?