W447 114cdi Bench Seat Conversion & SRS Connection

[2009fredster]

I’m converting a 114cdi panel van to a crew cab version. I’ve removed the front leatherette bench seat & replaced it with a single Tunja comfort cloth seat, the same has been installed on the drivers side. The seatbelt SRS female clasp on the drivers side has the blue & yellow cables which match the vehicles loom. On the passenger side, the seat has blue & yellow cables from the female clasp, but the van loom has multi-coloured wiring & a different connector configuration. Could anyone tell me which wire on the loom connects to each of the blue & yellow cables coming from the seat. I appreciate I’ll have to code the seats to the vehicle, but don’t want to risk shorting anything out by making the wrong connection. Thanks in advance. Mark

 

[2009fredster]

Install a 2.2ohm resistor across the cables to replace the feed from the seatbelt roller.