Wheel Weight Residue

Page may contain affiliate links. Please see terms for details.

JohnEclass

Active Member
Joined
Apr 26, 2012
Messages
453
Location
Planet Earth
Car
S6/Q5/C300/S4/W209/W211
Hi Guys,

Just had 4 new tyres, and of course new balancing weights....problem is, where they removed the old weights there is a black stripe where the glue is still stuck to the alloy.

Any suggestions on removing without marking the alloys?
 
I used white spirit but it still took quite a lot of rubbing.
 
Tardis will remove the residue without effecting the appearance of the wheel.
 
Any tar and glue rempver like Tardis or Rapide will work. If you've not any, petrol or white spirit will work.
 
^+1 petrol straight off,or perhaps a little safer lighter fuel.
 
Thanks for all the replies, will give it a go when the weather allows probably with lighter fuel :thumb:
 

Users who are viewing this thread

Back
Top Bottom