Where to buy front left front wishbone w215????

[Borys]

Advise pls ?
Apart of MB is there a place in UK I can get this?
Its the arm where shock is attached to it for abc suspension
Tried every where I think, usually representative doesn't know what abc is :-0
Help

 

[mercedescl500]

Advise pls ?
Apart of MB is there a place in UK I can get this?
Its the arm where shock is attached to it for abc suspension
Tried every where I think, usually representative doesn't know what abc is :-0
Help

As far as I am aware these are Dealer only parts. No pattern part available. I changed both of mine a few months ago. Check you can undo the set screws (grub bolts) in the bottom of the suspension leg first. These bolts are almost always seized and will be a headache to get undone. Good luck.

 

[Borys]

Ok
Thanx

 

[Phil woods]

I've just bought these of the bay 2153300707 took 10 days to arrive great quality serial nos ground off so possibly genuine oe manufacturer and yes the set screws are a pain in the ass
Phil

 

[V12]

Spray the grub screws with penetrating fluid at least a day or 2 before you want to have a go with it.
Then use a decent 3/8 Allen key socket on a 3/8 impact gun (using a 1/2 gun will just break the Allen key piece, no matter how good it is).
Sometimes it will undo it, sometimes not, but it will always put a lot of heat into the grub screw.
If it doesn't budge with the impact gun get a second socket and a bar and it will wind right out once it's warm.

If you've got decent tools and a ramp, the arm can be changed in 15-20 mins.

New grub screws are pennies from the dealer and worth doing.