White Lines on Comand Ntg 2.5 Display

Page may contain affiliate links. Please see terms for details.

topdown

Active Member
Joined
Jul 17, 2003
Messages
278
Car
E500
This started a couple o weeks ago, 2 lines then a few more. It is on all displays, map, radio phone and even the clock.

Is it a screen replacement ? Any information would be appreciated.
 

Attachments

  • IMG_2170 small.jpg
    IMG_2170 small.jpg
    49.4 KB · Views: 31
Solved White Lines on NTG 2.5 Screen

Bought a screen from German e-bay site €125 including shipping. It arrived from China within 3 days.

Was a bit apprehensive about fitting but the NTG 2.5 is quite straight forward. 4 screws and the face plate is off. Another 8 screws and the face chassis comes off followed by the printed circuit board. The screen has 2 pin plug and a ribbon cable.

Assemble in reverse. all done in 20 mins and a line free brand new screen!

Sorry meant to take pics but was keen to see if it was fixed.
 
I think it is more likely to be the ribbon cable at fault rather than the actual screen, but either way good job for getting it sorted effortlessly...
 

Users who are viewing this thread

Back
Top Bottom