Help 🙂

Page may contain affiliate links. Please see terms for details.
Today both the lower control arm have been changed all the shaking is gone but car still pulling to left a bit when braking.
 
This has to be suspension component surely???? Sounds like same as on my e46 when the bottom arms bush to body collapse???

Be interesting to see cure for this one.🤔

haha a bit late with that one:rolleyes:
 
This has to be suspension component surely???? Sounds like same as on my e46 when the bottom arms bush to body collapse???

Be interesting to see cure for this one.🤔
That rubber that attached to the body was rly bad that was causing all the shaking. But after changing both the pulling to left still there
 

Attachments

  • 1EC38E29-E7BD-4C59-814C-D8544EEC21A7.jpeg
    1EC38E29-E7BD-4C59-814C-D8544EEC21A7.jpeg
    1.6 MB · Views: 7
I take it the wheel bearings are ok?? but mechanic should have picked that up by now. Slider pins for the pads should also have been done. I`m struggling to see whats left to check. As said by JHS have you checked/replaced all N/S ball joints & steering ends. Have you had 4 wheel alignment checked too?? Does it drive straight to you or does it feel"off" in a straight line???
Good luck with this one
 

Users who are viewing this thread

Back
Top Bottom