Search results

Hi The car moves few yards and epc light comes on want move if any one wants any parts fill free to contact spent enough rather than scrape would sell parts cheaply to only club members, recently change oil, fuel filter calipers brake pads half exhaust by end of this weekend

c220d uneven idle epc lights spent enough might scrape Hi All I have used D900 no codes, used led tester changed brake switch idle switch and replace check all vacuum pipes did smoke test. Need advice recently spent £300.00 prior to mot ans serviced can not find fault any help or might end...

Decided to scrape w202121 epc light fault any 8mnths mot spent £300 before mot in feb2016 would not spent any money

I have change and check all pipes empty fuel tank try to open with different tool the ring holding sensor want turn will give second go this weekend try to move vehicle it cuts off EPC light comes on.

Hi what was your outcome for uneven idle on w202 16/02/2016 same problem to me

Try from halford ight be cheaper

RADO DIASTART nearly 40years no service require, sch proof at that time cost £75.00, now same design £350. END OF THE DAY YOUR CHOICE

test ignition ON ENGINE OFF check switch and relay fan engage magnetically

Start engine bring upto high temp, switch OFF engine keep ignition ON check switch at fan and relay, fan engaged magnetically rotating free when driven by fan belt. IF YOUR TEMP GOES HIGHER THAN SET TEMP OF RADIATOR CAP WILL OPEN AUTOMATIC AND GUSTS THE WATER OUT

test ignition ON ENGINE OFF check switch and relay fan engage magnetically

I had same problem with my w202, disconnect and fit electronic component from many post. SRS light not setting off. have any one experience with code reader,mine 1998 diesel. Have D900 code reader no luck. Any ideas welcome

I had same problem few months a go changed all return pipes fitted new. while fitting new smear with blue so it will not suck air from return pipes . secondly replace to and from pipes from fuel filter use silicon grease to smear o rings this will take gap around seals. I found no bubbles in...