nozzle

I was wondering whether it was possible to redirect the water jets as mine are too low. I have looked in the paper handbook and the electronic version and can find no reference to it. In the old days you just stuck a pin into the nozzle and redirected it, but this doesn't look possible on the E...

HI everyone Looking for at least one of the above for my 2004 W163 ML. TIA Jane

Does anybody have instructions for removing these little blighters from the bonnet - please! Thanks and regards, W.

Aus 2002 ML270 147,000 km. Number 2 injector is leaking. Small amount of black carbon has appeared. Time for new injector seals. My dealer tells me that new injectors should be installed at around 120,000 km. ($550 aud ea). My dealer also tells me that the injectors cannot be 'serviced' and must...

Hi To all, I really would appriciate some help please. Anyone with the above socket Please could you tell me the size that is printed on it. I have bought all the parts now to replace the leaking seals, but merc could not sell me a socket. In fact they suggested i come on here LOL. Thanks to you...

I used a needle to clear the twin nozzles. One side is always blocked. If I clear the other side, the first becomes blocked. Anyone know how to dismantle the nozzles to clean it thoroughly?:doh:

driving down the street i decided to wash my windscreen i suddenly saw a massive fountain on my bonnet. realised the nozzle flew off. how easy would it be to replace one of those? thanks shala

At last a proper tool to adjust and clean the washer jet nozzle...

......searching for ages to find the part number for a 203 estate rear washer nozzle both on the Russian system and on the direct subscribed Daimler Benz EPC. 3 cups of tea later, still not found it!! I can find it for the 202 est. but this one? Mars bar for the first person.........:confused:

the central nozzle (air blower above the climate control unit) lights have been working on and off for the last couple of months last night i took the unit out and decoupled it and found there are 2x 12v 1.2w lights inside this unit, I removed these and they seemed okay, i put them back in...

Does anyone know how to get the washer nozzle off? I think the washer hose has come off the one on the end, but am having trouble getting the nozzle unit out of the bonnet. Alldatadiy.com talks about a special tool (140 589 18 63 00) to undo the clips - anyone know if you can just do it with...