An aftermarket ABC magnetic filter?

[Flyinspanner]

Hi

I’ve just seen this, which may be of interest to those with ABC hydraulic systems

Now the only issue I have is wondering if those jubilee clips are going to withstand the pressure in the system?

I wonder if Pirtek have a filter you could install for extra peace of mind?

Pardon our interruption...

 

[Bellow]

Hi

I’ve just seen this, which may be of interest to those with ABC hydraulic systems

Now the only issue I have is wondering if those jubilee clips are going to withstand the pressure in the system?

I wonder if Pirtek have a filter you could install for extra peace of mind?

Pardon our interruption...

These >> Edelmann 70700 Power Steering System Filter | eBay if the hose barbs are suitably sized should work.
Install in (low pressure) return line(s) and buy better Jubillee clips - those supplied aren't great quality.

 

[Petrol Pete]

The ad states it is fitted on the return line . It would have to be , even with swaged hydraulic connectors this unit would simply explode on start up if it were fitted o the High pressure side.

Go to Legitstreetcars.com Alex had SERIOUS issues with the ABC on his V12 , it wasn't metal debris in the system ...it was rubber.

 

[Bellow]

''Edelmann's Power Steering System filter will filter out the metal particles and rubber flakes which naturally occur in power steering systems.''

Why spend £100 on a more complicated (thus failure prone) filter when £5 buys all the protection needed?
I've had them on my PAS and HydroBoost for a couple of years now - zero problems.

 

[alexanderfoti]

Also, something to note. A lot of the components are aluminimun and a the return already goes into a fine filter which is likely to catch nearly all debris.