• The Forums are now open to new registrations, adverts are also being de-tuned.

Final teddies on a citan

brownbeartony

New Member
Joined
Jul 17, 2018
Messages
12
Location
Bristol
Car
Citan :)
Hi all, I have recently acquired a 2014 Mercedes Citan Van and I’d love to fit some Ronal teddies. My question is can this be done? The stud pattern on the teddies come in 14x5.5 inch 4x108 et24 76 centre bore, 4x100 et38 68 centre bore and 4x100 et44 68 centre bore.
Can this be made to work or am I barking up the wrong tree.
Ps. I’m not 100% sure what the stud pattern is on the citan I haven’t had a chance to look behind the hubcaps.

Any help would be massively appreciated.
 
Damnit ronal got autocorrrected to final on the title, how do I edit?

You can’t edit the title unfortunately :(
You could report the post and ask the admin to kindly change it :)
 
Most Mercedes come with a 5 x 112 fitment but as the Citan is a Berlingo with a different grill apparently it comes with Renault fitment wheels 5 x 108 and a et of 44 ish. So even if you wanted to buy pcd adaptors it just wouldn't work due to the high offset. I'm also not sure if modern cars you could go down to a 14 " wheel due to brake clearance issues.

I personally would be looking at a Ford fitment (also 5 x 108) commercially rated wheel such as the 15" Fox Viper Van
 
Thanks poor man Porsche, that makes sense! Looks like teddies are a no go then. I didn’t even realise that I might need commercially rated wheels. Thanks for the good info
 
I didn’t even realise that I might need commercially rated wheels.

Yup they need to be rated for the maximum gross weight, tyres too. Also be careful as some van insurers won't cover you if you change the wheels to anything non-standard!
 

Users who are viewing this thread

Back
Top Bottom