• The Forums are now open to new registrations, adverts are also being de-tuned.

M271 E200K timing chain check.

Stocious

Active Member
Joined
Jul 4, 2019
Messages
304
Location
Cork , Ireland
Car
2005 E200 1.8 kompressor
Seen as the car is about to turn 200k I said I’d check the timing chain. Will upload a pic soon. One thing I noticed is the chain is not tight? You can move the chain with two fingers on the top guide, in and out. What’s up with that? Tensioner? I presume once running the tensioner is tight?
 
That's good news,has the chain been changed in the past?
 
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
That's good news,has the chain been changed in the past?
Hi, I purchased the car with 180k on it so I presuming it’s been changed, what you think of the video, I’m sure last time I checked it was tight!
 
I would not be worried about that...yeah a bit of slack,but if the car starts on the button and there is no

rattle or misfire/hesitation whilst driving, just be on the ball with oil/filter changes and check again next service.
 
I would not be worried about that...yeah a bit of slack,but if the car starts on the button and there is no

rattle or misfire/hesitation whilst driving, just be on the ball with oil/filter changes and check again next service.
All buttoned up, as you say oil filter and changes, it’s due one in the next month thanks.
 

Users who are viewing this thread

Back
Top Bottom