Flyinspanner
MB Enthusiast
Hi,
As some of you may know, we are looking at maybe getting a convertible, and then comes the question of a 200 kompressor (m271) or the V6 (m272)..... and their attendant problems. (Been looking at 2005- 2007 ish CLKs or maybe an SLK)
No we don’t want a V8 (got one already) and don’t want to spend a fortune on a newer car ( plus VED £££) ... is 2006 the cut off for cheaper VED?
Main Questions:-
1. Is there always a warning - rattles or CEL before they go?
2. Would an annual visual check during service detect early wear on original parts?
(I’ve read that a recommendation to check at 60k then every 20k)
3. Were all the issues fixed by 2008? (Seen engine number ‘range’)
4. If one bought a good, well running example of either, what are the approx cost of a preventative fix on them, and are the new parts made to a better spec to avoid issues in the future? (Assuming the valves haven’t said hello to pistons) (how much if they did?)
Cost for M271 cam sprocket repair at an indie?
Cost for M272 Balancer Shaft repair?
5. If there is a record of this work being already carried out, when were the “better” quality parts introduced? (Avoiding double remedy)
I realise that if you’ve been ‘bitten’ by these issues, then it was 100% failure to you, but also interested to hear from indies as to what they think the real failure rate may be?
(5% was one figure floated on my SLK/CLK thread)
As some of you may know, we are looking at maybe getting a convertible, and then comes the question of a 200 kompressor (m271) or the V6 (m272)..... and their attendant problems. (Been looking at 2005- 2007 ish CLKs or maybe an SLK)
No we don’t want a V8 (got one already) and don’t want to spend a fortune on a newer car ( plus VED £££) ... is 2006 the cut off for cheaper VED?
Main Questions:-
1. Is there always a warning - rattles or CEL before they go?
2. Would an annual visual check during service detect early wear on original parts?
(I’ve read that a recommendation to check at 60k then every 20k)
3. Were all the issues fixed by 2008? (Seen engine number ‘range’)
4. If one bought a good, well running example of either, what are the approx cost of a preventative fix on them, and are the new parts made to a better spec to avoid issues in the future? (Assuming the valves haven’t said hello to pistons) (how much if they did?)
Cost for M271 cam sprocket repair at an indie?
Cost for M272 Balancer Shaft repair?
5. If there is a record of this work being already carried out, when were the “better” quality parts introduced? (Avoiding double remedy)
I realise that if you’ve been ‘bitten’ by these issues, then it was 100% failure to you, but also interested to hear from indies as to what they think the real failure rate may be?
(5% was one figure floated on my SLK/CLK thread)