Mercedes Sprinter - 313cdi - 91955 and p0101 Limp Mode

[Jordan2204]

Hey all , New member here - I own a 313CDI - Few week ago I noticed a boost leak (Bottom hose on intercooler to the Throttle body) and it been going into limp mode , Ive replaced the Pipe but the Van is stuck in Limp Mode still , no Turbo - won't go above 25mph , EML flashing , Ive used 3 code readers and keep getting 91955 and P0101 - Ive unplugged the MAF and now im scratching my head - The codes are permanent and wont clear . Ive done alot of research online and 91955 are aiming to the Glowplug module but it starts fine , Relay light flashes and goes off , Ive read that the 91955 code also relates to the Throttle Body (which could make sense if something has been sucked in via the split) .

Just wondering if anyone has had an issue like this before?

Thanks in Advance.
Jordan

 

[Caskey]

Hey mate

Sorry noone responded,

Did you have any luck with this?

Ive got the same codes now and pointing me too the same direction, glow plug module or thottle body

Cheers