Vito Washer Reservoir Removal

[AndytheGardener]

Good evening everybody
I have Vito 113 CDi 2013 and the windscreen washers ain't working.
Have pulled off the pipe from the motor and no water coming out when activated which would suggest to me that the motor is blocked.
Does anyone know how to take the reservoir off?
I think I might have to remove the coolant tank but not too sure.
Any help much appreciated.
Thank you.

 

[Hogie]

Good evening everybody
I have Vito 113 CDi 2013 and the windscreen washers ain't working.
Have pulled off the pipe from the motor and no water coming out when activated which would suggest to me that the motor is blocked.
Does anyone know how to take the reservoir off?
I think I might have to remove the coolant tank but not too sure.
Any help much appreciated.
Thank you.

Did you manage to figure this out and remove your washer reservoir? I have the same problem, I think mine is leaking from the float seal right at the bottom. I had a quick look at lunchtime and I think the coolant reservoir does need to be lifted out of the way, then there are 2 bolts attaching it to the inner wing once the pumps are disconnected.
I will try and tackle mine this weekend when I'm not using it and will post back on here the steps I took. If you have managed to remove yours grateful if you do the same.

 

[alexanderfoti]

Yes coolant tank needs to come off, not too hard.

But

The motor can be changed with the washer tank in situe, just pops off.