Search results

It's from another car that was breaking

Sorry it was plain simple, headlights were removed, sensors kn axle were removed that's all, they're not hid they're oem bi xenons

The level sensors were taken from the axles and a response to the other fella, I did say on star I can see cornering illumination, so I'm sure that will explain whether I have star or know someone with star

I'm trying to get the loom and prices as I only need the wiring, I have everything else

BTW, I have the old vacume pipes now hanging, if I seal it up it should be fine?

I only ever have myself or 1 passenger

I see, well I'll give an update soon on how they are. Also, star is showing cornering illumination, I guess I can enable this too. Only thing I'd say is I despise the yellow high beams, I have looked into the led h7s with built in ballast but not sure whether the car will flag this up as an...

I assumed they may have had it, its like the dash loom has cabling for heated seats even though it may not have heated seats in the car and this is cause the loom is part of it. I am guessing it's a separate loom for the leveling sensors and not part of another.

Yes that's correct I do have the level sensors, i wonder If my car already has the loom?

Where can I get the loom? I have the level sensors and the control unit (without the 1,2,3). If you could please direct me to where it can be purchased from that would be great. How hard is it to wire it ?

Dont need auto leveling like I said, once its set properly that's it. I have washers already, I only need to connect the power plugs that's it and it's done. And maybe code but it's not flickering so I'll leave it as it is.

What's the purpose of the control unit? Is that for the leveling ?

They're original bi xenons, in terms of leveling it isnt really required once properly leveled. Wont be blinding anyone, Just to confirm, I do not need to rewire the existing power cable? I tried it and it works just fine. I will recode the SAM

Hmm, I do have one of those just need to change the cover to black.

The car has washers, the power connector was connected and the xenons worked without any flicker, I am not sure if it has the wiring for the auto leveling sensors, but I'm sure this can be manually adjusted from the headlights. Since I have no flicker I wouldnt need to reprogram it? Also, we...

On my current lights I have just 1 main connector and on the bi xenons theres 3. Can someone please explain the other two? The passenger side has 2 connectors on the bi xenon, one being the power. Are those for the level sensors? I connected the power cable and the xenons worked without any...

No I'm referring to the actual headlight its self. Yeah it will need recording via star but the bi xenons have 3 connectors where as the current headlight base 2 connectors so I'm wondering how I would go about using the current wiring to wire up the new headlights.

Thanks

Hi, I have a set of bixenon headlights from an 2004 vehicle. On my current halogen headlights I can see it has 2 connectors where as the bi xenons have 3. Is there a way to rewire the connectors or will I need a new loom?if rewire, does anyone have access to a wiring diagram. Thanks

Is your gearbox pipe connected through the condenser ?