• The Forums are now open to new registrations, adverts are also being de-tuned.

642

  1. F

    642 Heater plugs

    Hi All, I am fitting a new turbo unit to my 2007 sprinter, three heater plugs do not work and have not for the last 2 years but when the turbo was removed I attempted to replace one of them, I soaked around the plug with wd40 and used a 1/4inch drive T bar backward and forward and then it...
  2. BlackC55

    642 engine oil coolers leaking

    Hi, Just somthing to be aware of. We are replacing a huge amount of oil cooler seals on this engine at the moment. Its a 9.6 hour job to do, so can make it a few quid to fix. The symtoms are oil drips around the bell housing area. They can leak a horrific amount of oil and cover the underside...
  3. zenman63

    Valeo alternator regulator new in box

    I have new in the box Valeo genuine part regulator for sale. Cost £47 last week Sell £40 posted. Part number A004 154 19 06
  4. zenman63

    Viano with 642 engine alternator

    The alternator went on my Viano, red light on. Big job to get at with the drone end needing stripping out. £47 for the regulator and all day to fit.
  5. L

    V6 320 CDI 642 Rocker Cover oil leak

    As subject - Merc. CLS 219 V6 320 CDI 642 (diesel) engine Rocker Cover oil leak - this is leaking from the 2 'dowels' just under the oil cap (driver side). I have been searching for an exploded view of the cylinder heads, or instructions to remove the rocker covers - but to no avail. Any help...
  6. 1

    Diesel injectors 642 CDI

    I am after some help here. I am buying a couple of injectors for my car and the bosch part number is 0445115064 but the shop is trying to give me 0445115063. They are telling me that the two are the same. Is this correct or are they different. Would I need to change all of them. I know that they...
  7. zenman63

    642 heater plugs

    Hi, I of the jobs on the new Viano is number 5 or 6 heater plug. What sort of job is that?
  8. S

    2007 E320 CDI sport 642 940 cylinderhead removal guide

    Hi, does anyone know of any threads or useful how tos on the net for removing and refitting the cylinder heads on a 2007 E320 CDI sport, engine type 642 940. I have managed to suck up a load of water and blow the head gasket on my pride and joy.:eek: I have searched for days now but cannot...
  9. M

    642 engine replacement

    I am gona change a engine on a 06 s 320 cdi i am just wondering if it is strightforward as just switching engines or is there a lot more to it????if anybody can help thanks
  10. zenman63

    642 v6 cdi oil level sensor?

    Just fitted a new cluster and it has the oil level ready. What is fitted to the engine? Currently have a dip stick
  11. zenman63

    642 v6 cdi oil?

    How much oil is in the sump for an oil change?
  12. zenman63

    642 v6 cdi oil?

    Hi, What mobil 1 oil goes in this engine? 2007 38000 miles, 120 vito.
Back
Top Bottom