ezl

Hello ! I've a question in mind ! but before asking it let me explain :D as far as i know; there are two types of EZL modules used on the W201's. The old one that gets the RPM signal from ignition distributor hall sensor & the new one that gets the RPM signal from the flywheel speed sensor...

Just looking and this ezl came up and for £48.00 a bargain .These are short and hard to find . Item number is 271999761843 took me ages to find one and had it from Ireland in the end ,cost £90 £90

All, I After opinions on if I should disturb my ezl and put a new layer of heat sink paste. Car runs ok, but occasionally when hot the Rev counter will play up. I believe the feed for re counter comes from ezl. Car is r129 500 sl 1990. I am wondering if it is getting a tad hot and opening up a...

Hi after a few posts on the forum about the settings on the knob for fuel types .I think i have had answers from most of you on this. But my book Haynes said that all 2.6 engines have trimming socket to be set on number3 thats N on plug. for 95 ron fuel .Most of you have said set it on S .My...

I have an 8 pin EZL ignition module suitable for W126 and R107 V8's, tested and verified as working on my own 1989 500SEC. £250 delivered ono

As the title states. Looking for a late model w126 ('88 - '91) 560 ignition module / EZL / control box. Part number 006 545 5432. Its the one with 8 pins per socket and runs knock sensors. Need a tested used unit. Thanks

Apologies for bombarding the board with so many questions, but... It looks like my 190E 2.6 has the wrong EZL unit fitted. When topping up the oil I noticed that it has "4 Zyl" written on it, which made me look a little further. It's a Siemens unit, part no. 010 545 52 32, which a quick google...

Mercedes EZL ignition control pack for 119 V8 engines as found in W140 S Class, W129 SL, W124 E Class etc. Brand new with box. Part number: 0135456332 £300.

Brand new EZL ignition control unit for M119 V8 engines in W140, 129, 124 etc. BRAND NEW! Part number is 0135456332. These are close to £600 new, I'm looking for £350. Thanks.

Anyone got a spare? Need one for my E500 , part # 015 545 6232. I believe it's interchangeable with 015 545 6132/4232/4332/8532 with early build W140070/050/051 and 129067 chassis # with same displacement 5.0L LH-injected M119.97x Cheers! Bing

Bit confused here, The Bosch part number for my EZL unit is 010 545 9532 whereas the Russian Site indicates it should be either 0125452032 or 0125452132. I have seen this one on Ebay germany which matches the Russian number, and the seller indicates it is the correct one for a 24v M104 engine...

EBAY LINK I may need to replace my EZL ignition control unit ( there are still some other cheaper things t test/replace before I give up and try the EZL!) and given the one i have seems to go for around £350 2nd hand, I wondered if anyone had seen the above link before? it appears to imply...

A while back someone posted a enquiry about rebuilding EZL ignition units. BBA-REMAN use to do them but seem to be running out of units to rebuild http://www.bba-reman.com/content.aspx?content=mercedes_ignition_commonly_failing?? I found this company in the states who apparently rebuilds them...

Hello, After much fiddling, measuring and help from users of this forum I have concluded that mine is faulty. Does anyone have one they would be prepared to sell at non-MB prices? It is for a W124 300E-24 with a 104.980 engine. Failing that does anyone know of a company who can repair /...