Evening,
I've (almost) finished drying out my new W202 after it had the blocked AC drain issue - it has a dehumidifier in it right now.
I wonder how the cargo net is fitted to the passenger footwell. It clearly clips in place, but is the plastic join (for the bungee part - pictured)...
Hi Guys
Just a quick one, (I hope).
I've bought a used vacuum pump to replace mine as I'm having some locking issues with the boot.
Q. Does the replacement unit need to be programmed in or can I simply swap over the air and two electrical connectors?
Cheers
:bannana:
This mornings mishap is to knock the rear view mirror off my W211 E Class facelift 2007 (Avantgarde), which is hanging down on the wires.
There's a triangular aluminium plate which it seems to mount on but I can't easily find how to reattached it?
Any help or direction appreciated.
HELP
I have just replaced a company run 2010 C Class Sport Estate W204 with a 2012 facelift Auto model.
The detachable tow bar cost me a fortune a couple of years ago, so want to re-use on my new W204.
The tow bar references are all current for the new car.
None of the local fitters are...
Hi Everyone
I recently bought a 2003 ML 270cdi with 160,000 miles on the clock and it had a couple of blowing injectors (three and four if counting from the front) - the dreaded "black death"!
After reading the threads already on here (Very useful too, thankyou!) I decided that the removal...
White thing thats screwed in alongside the battery.
Hassle getting it off unless you've got the right socket and a screwdriver-type fitting.
Inserted new battery. Same width as previous one. Can't get wedge back down the side.
Any ideas?
I've read numerous threads online about replacing the ignition barrel. I had mine out and serviced by a local locksmith.
I've managed to get the barrel back in OK, but when I slide the hardened collar over the top, the only position it seems to want to go back into place is with the 3 key...
Advice please Gents; does anybody know if it's important to synchronise the position of the position sensors on the seat motors with the position of the seat.
I read a post about a week or two back re lack of stroke length on the head rest, & how the motor needed to be synchronised with the...
One of my rear door handles had to be removed a few years back during a bit of respraying to repair some damage to the door. Ever since then, the handle has been prone to coming off. Especially if pulled at a particular angle (towards the rear of the car), which causes the small end cap to come...
Does anyone have any idea how to refit the headrests (The padded material covered item not the metal support indside!)in the rear of a W124 Saloon? I changed the interior and i'm struggling to refit them.