amazighman
Active Member
- Joined
- Apr 22, 2016
- Messages
- 747
- Car
- CLK 430
Afternoon all.
Just getting around to replace the Injector seals in my W211 C320 CDI with two injectors blowing.
I have purchased both MB copper seals and Honda ones , People out there recommend Honda seals which look thicker , may be 1mm thicker.
Other says using Honda washer will raise the injector up in relation to combustion chamber and that might cause bad running.
Please let me know your opinion.
Cheers
Just getting around to replace the Injector seals in my W211 C320 CDI with two injectors blowing.
I have purchased both MB copper seals and Honda ones , People out there recommend Honda seals which look thicker , may be 1mm thicker.
Other says using Honda washer will raise the injector up in relation to combustion chamber and that might cause bad running.
Please let me know your opinion.
Cheers
