Connector identity

[chris clk320]

W124 e220 M111.960

Can anyone identify this connector just replaced the wiring loom/harness which was rebuilt by Silec however I have an extra connector that comes out at the front of the engine which doesn’t appear to have a home.
I took photos of every connector when removed but not this one it seems
Any help gratefully received.
Chris

 

[optimusprime]

Any numbers on it ast all ?

 

[W1ghty]

W124 e220 M111.960

Can anyone identify this connector just replaced the wiring loom/harness which was rebuilt by Silec however I have an extra connector that comes out at the front of the engine which doesn’t appear to have a home.
I took photos of every connector when removed but not this one it seems
Any help gratefully received.
Chris

Put an A in front of that long number and google it

 

[optimusprime]

Most of the looms made, are equiped with plugs that fit other models . and rather than make several looms Mercedes make just one and include all the plugs to fit them all ..So you found a plug, and it might be that the item it plugs in .to is not on your model..might be for the twin electric fans you mighyt not have .For a start off let us know the year iof your car its not in your profile .

 

[optimusprime]

Took some time ,,but results are like i said and one loom for all

http://www.w124performance.com/service/w124CD1/Program/ETM/wire_plug.pdf

 

[chris clk320]

Took some time ,,but results are like i said and one loom for all

http://www.w124performance.com/service/w124CD1/Program/ETM/wire_plug.pdf

Yes Silec said it’s for another temp sensor on some models mine has a blank under the plastic front engine cover where some models have an extra sensor