Engine misfiring (2016 w205 C63S) help

Page may contain affiliate links. Please see terms for details.
OP turned up this afternoon and I replaced the errant coil for him. Job appears to be a good’un
Hi Jobsworth

I have the same issue with my C63S however it is a 2019 model I thought they would have sorted the issue out by this time but looks like they haven't. The back order is still in place as I tried to order a coil pack yesterday from the dealers. By the off chance do you have another coil pack available? Thanks
 
We have had a couple of these have low compression....
 
OP turned up this afternoon and I replaced the errant coil for him. Job appears to be a good’un
Hello sir hope you are well, I've tried to contact you with no success, would you mind giving me a message over here?
 
I don’t mate, sorry.
Just seen that i can't message you on here, so here goes..

My c63s that you worked on is now possibly the worst maintained in the country at this current time (Due to me using as a daily and not giving her enough attention) and I'm looking to get her completely revamped.

Could i possibly bring it to you?

From the top of my head, it needs:

A new passenger side front ball joint
The passenger side headlight has been pushed in, not sure what parts needed here
New pads and discs all round
Steering alignment
Something to fix the engine squeak i get on cold starts
New rubber gasket of some sort that connects the turbo to the engine that's worn away (That you showed me when i last visited)
Full service & MOT

Cosmetically, i need a lot more done but mechanically, my car is dying for the things listed above.

You are the only person id trust to do this work on my car and I'm prepared to pay whatever needs to be paid. I need my car functioning as if she was new and i need to stop neglecting her. If you're able to sort the cosmetic side of things out, e.g calliper and rim refurbs, id be happy to put that through you too and of course it would be much appreciated. I'm prepared to pay whatever it costs to get my car back in top form.

In the current state, my car is embarrassing to drive
 
Just seen that i can't message you on here, so here goes..

My c63s that you worked on is now possibly the worst maintained in the country at this current time (Due to me using as a daily and not giving her enough attention) and I'm looking to get her completely revamped.

Could i possibly bring it to you?

From the top of my head, it needs:

A new passenger side front ball joint
The passenger side headlight has been pushed in, not sure what parts needed here
New pads and discs all round
Steering alignment
Something to fix the engine squeak i get on cold starts
New rubber gasket of some sort that connects the turbo to the engine that's worn away (That you showed me when i last visited)
Full service & MOT

Cosmetically, i need a lot more done but mechanically, my car is dying for the things listed above.

You are the only person id trust to do this work on my car and I'm prepared to pay whatever needs to be paid. I need my car functioning as if she was new and i need to stop neglecting her. If you're able to sort the cosmetic side of things out, e.g calliper and rim refurbs, id be happy to put that through you too and of course it would be much appreciated. I'm prepared to pay whatever it costs to get my car back in top form.

In the current state, my car is embarrassing to drive
Give Gareth a call at his workshop. He may not log in here for days.
Ace Engineering
01403 785000
 

Users who are viewing this thread

Back
Top Bottom