M113K CLS55 short shortie headers

[moodi]

Anyone know where to buy these in the UK?

Must be short headers that retain stock primaries. Thanks!

 

[m2287]

MSL in birmingham would be the best people to ask

 

[perrysock]

PLM shorty headers is all you need.
You need to sourse from USA. I installed them 2 years ago and no issues, no warping.

 

[moodi]

PLM shorty headers is all you need.
You need to sourse from USA. I installed them 2 years ago and no issues, no warping.

Ok, fair enough. Are they a straight bolt in/on job and line up well with the stock cats? Did you notice much difference in sound?

 

[perrysock]

No noticeable noise difference.
These were real bolt on. you gain power and low down torque. For mapping I am not sure because I did crank pulley at the same time so I needed remap

 

[andy27168]

On the PLM website there was a substantial discount available on these before Christmas, worth looking ASAP as it might be for the Christmas period only.

 

[moodi]

On the PLM website there was a substantial discount available on these before Christmas, worth looking ASAP as it might be for the Christmas period only.

These them, showing as $1500 ish here?

PLM Power Driven Mercedes 5.5L AMG Header E55 CLS55

 

[andy27168]

Enter "holiday2018" to get a further 20% off.

 

[Bobby Dazzler]

Enter "holiday2018" to get a further 20% off.

$1000 USD for the 6.2 M156, les 20% is £630 GBP before shipping and postage. That’s a bargain.

Not heard of PLM before. Thoughts on quality and reputation?

 

[perrysock]

Simon from here had them for some time, I had discussed with him beforehand.
No complains so far. The only think they turn purple after a while, but this is normal for SS metal.

 

[simon1966]

Still fine on my car, had them for several years now. Straight bolt on swap for standard. No real noise difference unlike long tubes, but I didn't want my car to be too loud anyway. My car compared to similar modded cars without shorty headers had good torque and power gains.