Mass Air Flow issue

Dazch53

New Member
Joined
Oct 6, 2025
Messages
1
Location
Widnes
Car
Mercedes E220 Bluetec. 2016.S212
Hi all,
2016 Bluetec W212 (S212 estate). Engine management light and limp mode occurring fairly regularly, every few weeks. Code is mass air flow fault. Took off the sensor and cleaned it with MAF cleaner (lots of black carbon deposits on the little copper sensor thing) and then cleared the fault with the OBD scanner thing. Then it was fine for a bit but then the fault came back. Tried an after market sensor and it all went to shit with immediate limp mode. I quickly replaced it with the old one. Engine management light and limp mode seem to come on when I apply heavy acceleration. High motorway miles. 216k. What do you reckon? EGR/DPF/Turbo/MAF sensor? I'm just an enthusiastic amateur. Hoping I can keep it on the road as I've had it from new and kept on top of all repairs and maintenance. It's pretty well looked after with no other faults. Advice welcome from the experts out there. Darren
 
Hi all,
2016 Bluetec W212 (S212 estate). Engine management light and limp mode occurring fairly regularly, every few weeks. Code is mass air flow fault. Took off the sensor and cleaned it with MAF cleaner (lots of black carbon deposits on the little copper sensor thing) and then cleared the fault with the OBD scanner thing. Then it was fine for a bit but then the fault came back. Tried an after market sensor and it all went to shit with immediate limp mode. I quickly replaced it with the old one. Engine management light and limp mode seem to come on when I apply heavy acceleration. High motorway miles. 216k. What do you reckon? EGR/DPF/Turbo/MAF sensor? I'm just an enthusiastic amateur. Hoping I can keep it on the road as I've had it from new and kept on top of all repairs and maintenance. It's pretty well looked after with no other faults. Advice welcome from the experts out there. Darren
Usually you have an air leak if there are air mass faults. Smoke test the intake first before throwing anymore parts at it
 
Took off the sensor and cleaned it with MAF cleaner

Our '94 E280 had many issues including frequent stalling and horrific fuel consumption. Tried cleaning the MAF - no go.

Bought a Pierburg MAF from AutoDoc for about 160€ and normal service has resumed. About the best step forward with this car aside from 40€ for 2 new engine mounts.

I have seen posts that suggest that the Pierburg MAF can be better than the original and a hell of a lot cheaper. I can't really comment on that.

We also did a smoke test and all looked pretty good.

Good luck.

RayH
 
I would consider checking that the EGR is moving freely.
 

Users who are viewing this thread

Back
Top Bottom