ChrisPDuck
Active Member
- Joined
- Aug 31, 2022
- Messages
- 227
- Location
- Nottingham
- Car
- 2006 W221 S600, 1983 VW T25/T3, 1984 Alfasud 1.5ti Green Cloverleaf, 2008 Chrysler 300C SRT Design
I have made some printable 3D models that may be of use to some on here.
One is a jacking point adapter with three different bases, suitable for a generic trolley jack, an axle stand and another specific trolley jack.
The other is a simple tool to help when refitting a wheel bearing grease cap.
I have posted ready-to-print STL files, as well as customisable OpenSCAD files, on Prusa's 'Printables' website:
Jacking point adapter: Printables
Grease cap tool: Printables
One is a jacking point adapter with three different bases, suitable for a generic trolley jack, an axle stand and another specific trolley jack.
The other is a simple tool to help when refitting a wheel bearing grease cap.
I have posted ready-to-print STL files, as well as customisable OpenSCAD files, on Prusa's 'Printables' website:
Jacking point adapter: Printables
Grease cap tool: Printables