Tekman
Active Member
Hi
I started car has normal open gates has normal got in after a short time pulled out Eml came on has going local did my journey no issue drove fine got back put scanner on Icarsoft MB V3.0
came up with this.
so I cleared code started no issue started ok so left it overnight started ok this morning did some motorway driving after about 40 50 miles fent a bit lumpy at 70ish then settled got where I was going left car for about 1 hr came back started car and EML light came on got scanner with me so plugged it in this message so cleared code drove home about a good hour on motorway gave it some boost to clear her throat drove great got home same message , so I Have a brand new bat wing with sensors in my workshop got it out removed left sensor I:E passenger side took mine off put new one in rebuild everything clear no light on but still shows this when I scan it,
I am right that on engine passenger side is left or is it because its German its Driver side that is left
any help appreciated
I started car has normal open gates has normal got in after a short time pulled out Eml came on has going local did my journey no issue drove fine got back put scanner on Icarsoft MB V3.0
came up with this.
so I cleared code started no issue started ok so left it overnight started ok this morning did some motorway driving after about 40 50 miles fent a bit lumpy at 70ish then settled got where I was going left car for about 1 hr came back started car and EML light came on got scanner with me so plugged it in this message so cleared code drove home about a good hour on motorway gave it some boost to clear her throat drove great got home same message , so I Have a brand new bat wing with sensors in my workshop got it out removed left sensor I:E passenger side took mine off put new one in rebuild everything clear no light on but still shows this when I scan it,
I am right that on engine passenger side is left or is it because its German its Driver side that is left
any help appreciated
