• The Forums are now open to new registrations, adverts are also being de-tuned.

W210 Cluster problems

oty200is

New Member
Joined
May 1, 2005
Messages
2
Hi can anyone tell me how to fix the malfunction messages on the cluster, the messages that I'm getting are:

1) Wiper washer warning level - even if the water is full

2) coolant level warning - coolant also full

3) lamp indicator warning - all bulbs are working

2001 W210 E220 CDI
 
The level warnings (both) are probably caused by the level sensor in the washer bottle. renew it.

Check all your bulbs carefully even sidelights and numberplate lights.
Try operating the lights one at a time until the warning comes on.
i.e. switch on sidelights only, then headlights. switch all off and press the brake etc..
 
thanks dieselman, what do you mean by renew it? do u mean that I should replace the content of the washer and coolant to a new one?
 
oty200is said:
thanks dieselman, what do you mean by renew it? do u mean that I should replace the content of the washer and coolant to a new one?
No, try a new sensor, or try someone else's.

I got a coolant light/warning a long time ago and I fixed it when I took the lid off to see if there was any coolant left, looked fine so I put the lid back on - warning/lamp went away :)
 

Users who are viewing this thread

Back
Top Bottom