• The Forums are now open to new registrations, adverts are also being de-tuned.

W211 3pc kit

  • Thread starter Thread starter Deleted member 138290
  • Start date Start date
D

Deleted member 138290

Guest
<div class="bbWrapper">I’ve purchased an e class cdi 3pc injector removal kit but I can not work out how to put the brass piece together with the thread and nut to pull an injector out ???</div>
 
<div class="bbWrapper">Any pics? Sounds like the type you take the top of the injector off and screw it onto that? Be careful though, if you are re-installing the same injectors then don't lose any bits. Are they stuck hard? A hot engine helps.</div>
 
<div class="bbWrapper">Search anywhere for 'black death injector removal' - not suggesting you have black death on your engine - but all of the injector removal methods (including the official MB built pneumatic hammer) can be seen in action.</div>
 
<div class="bbWrapper"><a href="https://forums.mbclub.co.uk/attachments/9c4142f3-ab29-4d70-952a-d959a82df976-png.92019/" target="_blank"><img src="https://forums.mbclub.co.uk/data/attachments/65/65618-d5a919a1dd3e3cb39f1d9dc548fa32db.jpg?hash=1akZod0-PL" class="bbImage " style="" alt="9C4142F3-AB29-4D70-952A-D959A82DF976.png" title="9C4142F3-AB29-4D70-952A-D959A82DF976.png" width="184" height="400" loading="lazy" /></a></div>
 
<div class="bbWrapper">Worked how to use the kit, just the 27/29mm special socket sits on top the the injector and you just push/ pull with a ratchet or prefably a king bar and slowly the injector moves and pulls itself up and out the hole but, I managed to snap the bolt that holds this injector so although I’ve freed this one I now have a job to drill bolt out and for some reason I could not get a drill bit to cut into this thread so having to get a mobile mech to come out to me ..... funny because the last bolt I snapped in another hole drilled out with ease and I managed to just replace with new bolt, no hassle !</div>
 
<div class="bbWrapper">There is a water jacket underneath so be careful how far/deep you drill it!</div>
 
<div class="bbWrapper">Were you using a cobalt drill? They will cut when an ordinary HSS bit won't touch it.</div>
 
<div class="bbWrapper">A metal drill bit set I bought a few years ago which up until this last bolt had no problem drilling into them ?? Very odd.....</div>
 
You must log in or register to reply here.
Back
Top Bottom