W212 E350 estate ride height sensors

[mahussain2000]

Please could some one advise the correct part number for replacement rear ride height sensors?

I have had the car checked and the linkage on both sides is broken or corroded


Hussain

 

[mahussain2000]

Please could someone post the part number for rear ride height sensor complete

Thanks in advance

 

[W1ghty]

Please could someone post the part number for rear ride height sensor complete

Thanks in advance

Contact Mercedes Smart Newcastle eBay for the correct part of your nearest MB parts dept . The arms aren’t expensive

 

[mahussain2000]

Contact Mercedes Smart Newcastle eBay for the correct part of your nearest MB parts dept . The arms aren’t expensive

Just got a quote from MB Newcastle and they quoted £408 for both rear sensors

Can anyone advise on any discounts. MB Newcastle were cheaper than main dealer in the past, but now it’s the same price as my local mb dealer.

Thanks in advance

Hussain

 

[W1ghty]

Just got a quote from MB Newcastle and they quoted £408 for both rear sensors

Can anyone advise on any discounts. MB Newcastle were cheaper than main dealer in the past, but now it’s the same price as my local mb dealer.

Thanks in advance

Hussain

Don’t you just want the arms ?

 

[mahussain2000]

Don’t you just want the arms ?

Sorry I was lead to believe that only the whole sensor was supplied by dealer. I will ask to see if they supply the arms.

 

[W1ghty]

Sorry I was lead to believe that only the whole sensor was supplied by dealer. I will ask to see if they supply the arms.

It’s worth checking , I replaced a rear arm only a few years ago , it was £30

 

[Weds]

Please could some one advise the correct part number for replacement rear ride height sensors?

I have had the car checked and the linkage on both sides is broken or corroded


Hussain

Very common, the links are only plastic and the balls they clip into rust and swell up and then snap the link arms. Better quality stainless ones are/were available on Ebay..

 

[mahussain2000]

Very common, the links are only plastic and the balls they clip into rust and swell up and then snap the link arms. Better quality stainless ones are/were available on Ebay..

Can you post some links?

 

[Weds]

Can you post some links?

W212 Mercedes Benz E Class SALOON Height Level Sensor Repair Arm / Upgrade | eBay

Fitted an identical assembly to a 2010 W212 E Class saloon. SINGLE: Repair arm for rear height level sensor so you don't have to buy the whole unit from MB for ~£225. Central threaded stud is zinc plated steel.

shorturl.at

 

[mahussain2000]

Unfortunately MB don’t supply arms separately.

Please can someone provide the guide to replace the drivers side rear ride height sensor?

Also I have Carsoft MB II - will I need to program the sensor?

W212 T Model.

Thanks in advance

 

[mahussain2000]

W212 Mercedes Benz E Class SALOON Height Level Sensor Repair Arm / Upgrade | eBay

Fitted an identical assembly to a 2010 W212 E Class saloon. SINGLE: Repair arm for rear height level sensor so you don't have to buy the whole unit from MB for ~£225. Central threaded stud is zinc plated steel.

shorturl.at

Just fitted this part but car is still low. Any way of calibrating height without star?

 

[Weds]

Did you set it the same length as the original ?

 

[mahussain2000]

Sorry my mistake the adjustment link was pointing the wrong way.

The link was set at same size as the broken original link.

The car has raised but the replacement link side is still too low on the replaced-link side.

I have uploaded images of scan tool