Recent content by Littledigger

I've got a loud buzzing noise coming from the engine bay fuse box area and the car is difficult to start after leaving it for the day. is this 1 fault or 2?

SOLVED. Still don't know what it connects to but I solved the problem by getting under the car and reaching up above the starter to have a feel. found the socket for the plug.

I've just removed the inlet manifold on my clk 270 cdi (pre facelift) to remove the swirl flaps and after re installing the manifold and stuffed the wires through the middle, I have a green 2 pin plug that I can't remember where it plugs into. It's on a short wish wire but just can't find where...

excellent write up. I did this job and now I can't remember where the 2 pin plug goes from the loom mentioned in no. 13. I've connected the sump sensor, starter cable, connector at top of gearbox and put a 4.7k resistor in the swirl flap cable, but still a 2 pin plug is not connected and I don't...

Hi all Just did the parking brake cable clip repair. The source of that annoying clicking sound. Thanks for the advise. I used a couple of cable ties and it’s worked well.

Thanks Richard, looks like I'll be looking for an upgrade to ntg2.5. I was wondering if engineering mode would offer me some help but now not needed.

Also confused why I can't access the engineering menu. Though I have the Bluetooth phone module plugged in, would this for some reason affect me accessing engineering mode?

Hi guys I bought a reversing camera from fleebay, installed it and connected the power to the reverse light, got a fakra to phono leed and plugged it into the green port of the comand but the camera will not show either when I select reverse or when I press the video button on the comand...

I would rather pay 25% more than the RRP than use the ECP rubbish online service. I've never used the local counter service, a discount here would tempt me to re-try ECP.

excellent job, but what happened to your bonnet star?

The Dash Mat should stay firm without anything else holding it, otherwise its not doing the job properly. I would recommend buying a different Mat.

Well done to you Jonno1972. You've really turned the interior into something to be proud of, its sooooooooo much better now.

I've been looking for a switch set for the W203 facelift that includes the rear wiper but none available second hand, so i took apart a switch set i have and noticed that the circuit board has the rear wiper switch on it except for the lower led for illumination when the lights are on. Does this...

This is why the rest of the western world see the uk as behind the times and needing a giant kick up the farse.

Its a stupid advert. It makes me want to go to a merc dealer to take a closer look at that S class it brushed by so quickly.