adhesive

I have removed the spoiler from my car as it was coming off due to poor application by a previous owner. As a result it has left a fair bit of solid residue on the boot lid. Any recommendations for how best to remove it? Thanks.

Hi, looking for a trade adhesive for bonding in steel water pipes etc to 'stat housing's and other parts like breather tubes . Strange request maybe but trying to find o.e. stuff is not easy. Also face sealer for gearboxes and crank cases. Manufacturers use a grey sealer that goes off hard and...

I have spent the day taking the wheels off my recently acquired E350 Bluetec to see how worn the pads are as the car has covered nearly 42,000 miles in its first year. While the wheels were off I thought I would clean the inside of the rims and remove the old adhesive from where the previous...

Has anyone tried to clean of the adhesive left on the wheels after the balance weights have been removed. I have some AMG rims that the weights were removed, and what a pain in the ar*e trying to remove the adhesive, tried super glue release, pretty useless, then a hot airgun it removed the...

Hi all, Trying to remove the adhesive residue left on the rear of my SL bumper by the old parking sensor mounts. Have tried meths, white spirit and acetone but no real joy. See pic: Any one know a solvent I can use as need to clean the area up prior to applying some new holders? Thanks in...

Hi, what adhesive should I use to fix carpet type fabric to my van ceiling. I had used double sided carpet tape plus carpet glue and the lining went up a treat no look fantastic. However today in the heat I have noticed in places it's starting to drop. Any advice would be gratefully received...

hello back to the w124 trim panel that was compromised and had a little leak the old seal was what resembled the black adhesive used when mounting a windscreen. It was a black gummy type feel substance.. and i need to replace this seal with a new one.. any advise of what i should be using...

Can anyone suggest a good sealant type adhesive to fit a new boot seal with on my W126 please? Obviously not bathroom type silicone as that rusts metal. I'm getting exhaust fumes in the car and this is something i thought worth doing anyway as it also leaks slightly.

Recently my CDI became only a DI, when washing off the old glue I used what I thought was a soft scourer only to leave a patch where it looks as if the paint has faded slightly. Will a good polish/buffing take this back to normal before i put on the new badge? Also anyone with Tanzanite Blue...

Just brought a spoiler to put on my car. Is there any particular tape I should use to stick this on? Anyone can recommend one? Thanks all.

What is the best adhesive to use on a car dashboard that will not come off even in really hot weather? I've tried double sided tape and and ultra-strong velcro, but everything seems to melt off of the dashboard with this heat. Any suggestions? Its for the Parrot ck1300 Headunit. i am tempted to...