• The Forums are now open to new registrations, adverts are also being de-tuned.

p2015

  1. Virusuk

    OBD code p2015 limp mode

    Hi Gents Got obd code p2015 on my 2007 plate s320 cdi. Smokes like a chimney. Had dpf replaced recently. About week or two ago noticed some consistent amount of black smoke coming and throttle idling when pulling from the line. My plx scanner showed EGR system readiness not completed and no...
  2. I

    W/S204 EML Light, Limp Mode and Error Code P2015

    Hello all, A week into ownership of my S204 C320 CDI i have run into problems with the EML light on, and the car reverting to limp mode. Car was attended by breakdown organisation this morning, and Error Code P2015 identified, which appears to point towards Intake Manifold Runner Position...
  3. P

    C200 CDI (2004 203K): Fault Code P2015

    My C200 is constantly going into limp mode (3000 rpm max) after 5 minutes of driving and putting on the MIL light with OBD Code P2015(2015, Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance). Any ideas what the problem might be? Note: the MAF sensor and EGR seem to be...
  4. P

    Turbo for C200 CDI (2004 203K)

    Hi guys, This is my first post here so please be patient... The dashboard light came on and when we had the OBD codes read we had a P2015 code. After a long and convoluted process I found that the bearings have gone on the turbo of my 2004 C200 CDI. Any ideas where I can get the unit...
  5. J

    P2015 S40/3 (Clutch pedal switch) , Fault

    I got the above error code with my R170 with WIS. Will changing the sensor at the clutch fixed the problem?:doh:
Back
Top Bottom