I need a pair of w211 facelift headlight trims. I believe the part number for these are:
A2118200512 - Left
A2118200612 - Right
See attached image for reference
Hi,
I've tried to purchase via the main eBay vendors, Eurocarparts and finally the main dealer the two pins that hold the front calliper pads in place.
None main dealer parts are for the later 1998 onwards cars fitted with larger front discs. So useless for my car.
The main dealer described...
It should have been a routine job Discs and pads done it on the 220 the 240 but not the W210 Passenger side all done EBC greens fitted all back together, now onto the drivers side repeat of the process undo the disc retaining bolt ooh that did not need much pressure on the allen key and the...
I've decided to let my Mum have my old Samsung Galaxy S2.
She currently pays £5 a week on Vodafone PAYG. I know she could get a contract phone for that much, but prefers to just top up when she pleases. Her existing phone is 7 years old.
She would need to retain her existing number and a little...
Changing discs and pads on my c class 203 with sport pack, how do I remove the retaining pins that go through the caliper to keep the pads in place?
Cheers in advance
I've got a 2000 W210 E320 CDI straight six and today I popped a load of diesel fuel system Redex into the tank and within ten minutes the injector nearest the bulkhead (rear of engine) blew out because the bolt that holds the little forked retainer in has been seated in a helicoiled hole.
My...
My roof is not working because one of the small plastic clips to hold the luggage protection thinghy has fallen off and been lost.
Anybody know where I can find a replacement.
I was trying to change the dipped bulb.
The manual instructions say, remove bulb, remove connector.
It doesn't mention there is a retaining clip which then dissapeares into the engine bay.
Mercedes say this is not available separately and will cost me £175 for a new headlamp assembly.
Are...
So,
In the process of changing (zenon) n/s headlight, the metal sprung retaining clip completely came off.
I have spent much time trying to put it back, and swearing. The issue of course, is that I can't see what I'm doing. The clip must secure somehow at the top. I've tried lowering my...
Offered for sale.
I bought this new - shortly before my previous E300TD was wrecked.
Little-used ... Undamaged and in excellent condition
Genuine MB accessory
MB Part No A210 898 03 07
I'm looking for a fiver cash if you collect from me in Barnsley or Bradford.
If you want me to send it to...
Does anyone know where I can get 4 retaining clips ( oval ) for the carpet mats for my SLK
I've tried ECP and main dealer but no joy at either.
Thanks, Brian.
so you guys may have remembered my problem 2 weeks ago with the brake caliper mount bolts. Well those got taken off with no problem with some high quality penetrating oil and a breaker bar.
Now I have a problem with the disc retaining screw, this is little bugger has proven to be an extreme...
As title.
Original Mercedes Boot Liner
Original Mercedes Cargo Retaining Net (used as a dog guard in my case).
Both items 4 months old.
I think I paid somewhere in the region of £200 after discounts for both items.
Make me an offer for either or both.
Item location Junc 6 M25 (Godstone...
The W202 fuel tank senders are underneath the car on opposing sides. They are retained with a ring nut which is undone by a special tool.
Whilst they can be undone without a tool, sometimes they're easy, sometimes the aluminium the nut is made from corrodes to the steel of the fuel tank...
Today I changed my car's brake discs and pads. But I had to drill out the disc retaining screws as even an impact hammer would not remove them.
I didn't anticipate this happening so I had no replacement. So I just refitted with new parts minus the screw.
But I would like to replace the screw...
Does anyone have a spare pair of the chrome retaining hooks that screw onto the rail under the front seats on a W210 to hold the mats in place?
TIA. :)
I tried to service both cars rear drum brake over the w/e.
The Smart car rear drum is held in place with a Torx screw. It was on VERY tight but after a few slips I managed. Pads and drums looked OK. Good.
But on the Audi the drum is held on with a conventional phillips screw. So all I had on...
Had blow by on number 1 injector
Cleaned everything up with Oven cleaner, to get rid of the carbon deposits. injector came out fairly easy.
Cleaned the bore and mating face with wet&dry glued to the end of a clutch alignment tool - worked very well
Cleaned injector and mating face by...