*190e Fan Switch*

[stuu]

Hello, my 1992 2.0 190e is overheating and my mechanic said it needs a new fan switch. None of my local scrapyards have any and I'm stuck as my mechanic can't get either.

Does anyone know where i could get one? Any help is appreciated!

Stu.

 

[Will]

Should be easy enough to get one new from MB? Wouldn't have thought it would be expensive.

Just pop into your local dealership - they might have one on the shelf if you're lucky

Failing that there are other suppliers like GSF but I don't trust them as they are quite bad at supplying you with the correct parts.

Will

 

[stuu]

My mechanic tried a MB dealer and they don't do any anymore I tried ebay but couldn't find any either!

 

[nick mercedes]

My mechanic tried a MB dealer and they don't do any anymore I tried ebay but couldn't find any either!

MB still sell them, you may have to order one, but they're still availible.

 

[stuu]

Do you have a link for one? It'd be great if you can

 

[AndyPCD]

Hi
if you have the chassis number to hand i will look one up for you

many thnaks

 

[nick mercedes]

Do you have a link for one? It'd be great if you can

A0065459024 £15.03 retail, or a bit cheaper here:

euromercwebstore: Temp Sender

 

[Will]

There you go - cheaper than MB, genuine part and available delivered I would think

Will

 

[stuu]

Thanks very much, so that's the part i need?

euromercwebstore: Temp Sender

So it's a temperature sender? Sorry if i sound stupid, im useless with anything to do with cars!

 

[nick mercedes]

Thanks very much, so that's the part i need?

Make that A0065459124

 

[stuu]

I'm slow i dont know which part or link you mean now

 

[stuu]

Sorry for double post, is this what you mean?

SWITCH,AUTOMATI - - Mercedes-Benz Parts, Inchcape

will this definitely be the right one for my 1992 2.0 manual 190e?

 

[stuu]

Update!

I ordered a part using this number: A0065459124

The switch that needs replaced is 4 pinned but I was told 190e fan switches are only 2 or 3 pinned. The place I bought it off told me that it wasn't a fan switch but some switch to do with the ecu and fan and that it was 4 pinned. I honestly don't know if its the right switch but lets hope it is

 

[grober]

The fan solenoid switch is either 2 pin (switches at 100c) or 3 pin (used for auxiliary fan when aircon is fitted ) switches at 110c--- now I believe only the 3 pin switches are available but as long as you use the right connections everything will be fine

 

[stuu]

So a 3 pin fan would theoretically work in a 4 pin connection?

 

[grober]

Do you mean the wiring plug/connector has room for 4 pins? As far as I know there has never been a 4 pin switch for the electromagnetically switched fan made by Mercedes. Usually mercedes plugs will only fit one way so you should be OK as long as no-one has changed the original wiring/plug/switch combo.