312 sprinter injector help please

[toolman1954]

Hi, I have an R reg 312 Sprinter with the 5 cyl 2.9 turbo engine, and I have a blowing injector, number 4 to be precise and this has been chugging away for at least 12 months. I have already bought the sealing washers, new bolts and grease and today I decided to bite the bullet and remove the injector. Having remover the air intake assembly that sits over number 4 injector, I have unscrewed the feed union from the top of the injector and removed the little leak off connection from the side and now want to know how to remove the injector out of the head??? I have read of using slide hammers, but there is certainly no room to accommodate a slide hammer as the bulkhead sits close by. Any thoughts or comments please as to how to get the injector out??


Thanks
Steve

 

[ringway]

Try THIS.

 

[toolman1954]

Hi Ringway, thanks for your link, however the injectors seem to be a pushfit rather than screwed in. So I am still looking for some inspiration to get the injector out. http://www.mbclub.co.uk/forums/attachment.php?attachmentid=23694&stc=1&d=1305838689

 

[Danny DeVito]

Vice grips and a wiggle wiggle