A/c W202

[c200Kompressor]

Hello! My C200 as an automatic climate control. Are any tricks for it? Press 2 keys to obtain a "new funtion"? Press 1 key for X seconds and so on...

 

[NW_Merc]

Sorry to sound blunt, what are you trying to do?

 

[television]

The 203 works better after a flap re set now and again

203

To reset heater flaps and actuators

Switch on ignition.

Press recirculated air and defrost buttons on control panel together for longer than 5 seconds.

The LED's in the defrost and recirculated air buttons flash alternately.

Wait until the LED's stop flashing (approx 30 sec) system set to defrost LED on.

Switch off ignition.

After 40 sec re start engine.

 

[ibrar]

Sorry to sound blunt, what are you trying to do?

 

[c200Kompressor]

Sorry. Forgot to tell: my C200 is a W202.

 

[mr. shr]

Hello! My C200 as an automatic climate control. Are any tricks for it? Press 2 keys to obtain a "new funtion"? Press 1 key for X seconds and so on...

Is this what you're looking for?

Applies to the W210, W208 and W202 with digital climate control display:

With a running engine, press the "REST" button for 5 seconds

Use the "Auto" button or the "+/-" button (depending on model) for the following readouts:


01 = In-car temperature sensor
02 = outside temperature sensor
03 = left heat exchanger (heater core) temp sensor
04 = right heat exchanger sensor
05 = evaporator sensor
06 = Engine coolant temperature
07 = refrigeration pressure in bar
08 = refrigeration temp sensor
10 = Blower control voltage
11 = emissions sensor (Bsp.: 3.1 = 31.v)
12 = sun sensor (Bsp.: 4.2 = 4.2v)
20 = aux cooling fan control 6.1 = 6.1ma (max 10ma)
21 = engine speed RPMs x 1000
22 = vehicle speed KPH
23 = Circuit (Bsp.: 99 = 99% of battery voltage)
24 = BATTERY VOLTAGE (Bsp.: 12.5 = 12.5v)
40 = control module version software status
41 = control module version menu hardware status
42 = control module variant code 1st number
43 = variant code second number.

Press "Rest" to leave the menu.