• The Forums are now open to new registrations, adverts are also being de-tuned.

C200 Window

normanr

Active Member
Joined
Aug 14, 2006
Messages
757
Hi
Anybody know how I can get my back window back up.
The switch pack is not working I have one on order but until then I need to get the window up,can anybody help as it is electronic I need to know what connections go to the nearside rear window on the connector plug so I can give it some DC to send it back
Norman
 
Last edited:
I cant help you with the connections you require but I suggest you remove the door card and try wiggling the wireing connections at the motor while someone els operates the consol switch, in my experience the fault is most likely at the motor wireing and not at the consol switch
Dec
 
In my experience the loom in the door gets damaged because the door is open and closed so many times. So it only takes one wire in the loom to break.

Check the wires in the door loom.

Hope this helps.
 
Hi Guys
Thanks for all your help on the window problem I bought a new switch pack from Dronsfields which arrived today I put it in and the window problem is sorted.
Just stuck with this damn starting problem now.
Once again thanks for your help
Norman
 

Users who are viewing this thread

Back
Top Bottom