• The Forums are now open to new registrations, adverts are also being de-tuned.

CLS Rear Suspension level sensor arm

RetroMarcus

New Member
Joined
Sep 3, 2019
Messages
1
Location
Cirencester
Car
W219 CLS 320 CDi
Im just about to start on this one having waited a week to get the parts from Mb dealer.

Has anyone had the joy of doing this job or am i on my own?

Any help will be appreciated, otherwise i'll take plenty of pics as I go, lol

Cheers RM
 
I think it just bolts on and off. But...take the pics.
 
Most of these sensors involve an arm clamped to the torsion [ antiroll] bar with a U bracket. If your set up is similar it might be useful to soak any corroded nuts involved in Plus Gas or other releasing agent for a few days before setting to with spanners. Always a good idea to use new securing bolts/nuts on any of these jobs- makes re-assembly so much easier/pleasant. As suggested take pics before starting any dismantling as a guide to component orientation/ mounting angle
REGULATION OF DYNAMIC HEADLAMP RANGE CONTROL, REAR MERCEDES CLS-KLASSE [Car] [CHASSIS] (EUROPA)
 

Users who are viewing this thread

Back
Top Bottom