• The Forums are now open to new registrations, adverts are also being de-tuned.

Command comes on a few scs then goes off?

carlbr

Member
Joined
Jun 27, 2014
Messages
35
Can anyone advise The command system comes on for s few secs with the mecedes Benz logo and then goes off Is it a fuse The battery went dead a few days ago and the AA came and jump started it Everything perfect Left car a day but was iced up When I started it and took a drive the command system radio etc Does not come on Just the logo for a few secs. I know there are fuses in the boot next to the control box for the command. Any ideas I have no manual book just the manual online and it does not show fuse chart Many thanks for any help.
Thank you Richard I took your advice and started a new thread.
 
Last edited:
Does anyone know is the fuses for the command in the boot. I notice there are about 12 fuses adjoining the control box in the boot
Thank you
 
http://www.mbclub.co.uk/forums/electronics/183477-comand-ntg-4-5-a.html#post2033610

Each control unit I mentioned has individual fuse. The AGW and Nav processor at least are in the boot. The fuse chart is in the fusebox behind the cover on the end of the dashboard, driver's side, visible when the driver's door is open. Thats where the CDC fuse is. Can't remember the rest.

R
 

Users who are viewing this thread

Back
Top Bottom