e320 trans trouble

[raptor4994]

i have a 1997 e320 wount shift from first gear code shows p0175 code input/turbine speed sensor A circuit malfunction serviced trans nothing in pan put new filter gasket replaced o ring on conector same thing HELP!!!!!

 

[Dieselman]

Input shaft speed sensor. It's part of the electronic plate so either it has a bad connection or a new plate is required.

 

[raptor4994]

e320

thanks for reply were is it located !

 

[swells]

trans trouble

thanks for reply were is it located !

in the bottom of the gearbox about £580 at main dealers

 

[raptor4994]

E320

that would be valve body in pan correct !

 

[raptor4994]

e320

im in us sorry !

 

[wass]

it attaches to the valve body its made of plastic like a big pcb and and the turbine speed sensor is built in to it

 

[swells]

trans trouble

that would be valve body in pan correct !

yes thats the one, ok sorry but i dont know the $ price but good luck

 

[wass]

also worth checking the wiring for the box to ecu for continuity we come across both problems quite often

 

[raptor4994]

e320

thanks for the help i will know were to start found a 1995 trans for 200.00 that wount back up should i get it for the parts i need but are they the same!

 

[wass]

just had a quick word with our tranny builder he says there not the same just get a new one there cheaper in the u.s. than in the uk

 

[MrMotul]

I bought the same part 2 weeks ago for my Gearbox, cost around £130 from Mercedes,

Good Luck,

Terry.

 

[raptor4994]

sensor

does trans valve body are plate have to be removed to replace?