Exhaust tips

[Chas]

Will these pipes fit my S320 without modifying the bumper ?

http://cgi.ebay.co.uk/ws/eBayISAPI....m=140238256447&ssPageName=STRK:MEWA:IT&ih=004

"Here I sell original AMG final tubing screens (2 pieces) with AMG logo. Suitably for S class W/V 220 Screens must be welded. Measures Width approx. 120mm Height of ca.80mm Front edge above to entrance pipe ca.100mm Front edge down to rear edge approx. 190mm Entrance pipe diameter approx. 52mm Attention dispatch within Europe possible. Dispatch to Switzerland 30 euros Spaßbieter finger away. Please as intended purpose always ebay name write "


Thanks

 

[tudu]

Will these pipes fit my S320 without modifying the bumper ?

http://cgi.ebay.co.uk/ws/eBayISAPI....m=140238256447&ssPageName=STRK:MEWA:IT&ih=004

"Here I sell original AMG final tubing screens (2 pieces) with AMG logo. Suitably for S class W/V 220 Screens must be welded. Measures Width approx. 120mm Height of ca.80mm Front edge above to entrance pipe ca.100mm Front edge down to rear edge approx. 190mm Entrance pipe diameter approx. 52mm Attention dispatch within Europe possible. Dispatch to Switzerland 30 euros Spaßbieter finger away. Please as intended purpose always ebay name write "


Thanks

I have quad pipes and if you are intending to fit those in the picture, i should imagine you will need cut-outs made in the bumper. A good exhaust centre can do this for you, but remember once done, and if you wish to change back at a later date you will need to buy a new bumper. Hope that helps.

 

[tromppost]

Do not do it! Keep it original. The S class looks great as it left the factory imo.